2013年10月23日星期三

Sprayers often malfunction and troubleshooting

Sprayer will always encounter everyday use spray ineffective, switch leakage or screw fixed , leaking joints , etc. fails, then it should be how to troubleshoot them ?

Insufficient pressure sprayer atomization bad : If you flip the joystick when the spray more than 15 times , the barrel pressure has not reached the working pressure , farmers should first check whether the inlet valve Geqi been debris , resulting in insufficient air pressure affect the effect of atomization . Inlet valve can be removed , if there is , then the application rag scrub clean ; if the spray pressure is still insufficient , you should check the gas chamber cup without damage, if damaged , replace the new cup ; Ruoyin sealing joints ring is not installed or damaged cause leaks , you should install or replace the seals.

Not a liquid spray mist : nozzle body inclined holes are not blocked by dirt is causing spray mist one of the most common factors , farmers can remove the nozzle from the spray hole reverse blowing , the clogging dirt can be removed ; Ruoyin can open the cleaning nozzle clogged hand held sprayer spray holes, but can not use hard objects such as wire poke orifices to prevent perforations to expand , affecting spray quality ; Ruoyin casing filter is clogged or too small ball valve dirt Geqi , and cleaning of the filter should be cleaned Geqi ball dirt.

Switch leakage or screw fixed : If for switch cap is not tightened , you should tighten the switch cap ; Ruoyin switch core gasket leaks caused by wear and tear , replace gaskets. Switch screw fixed place mostly because of longer , switching core is etched and stick Pharmacy , farmers should switch on kerosene or diesel oil to soak for some time, and then removed and washed clean.

Leaking joints : Ruoyin connector is loose, tighten the nut should be ; Ruoyin washer is not flat or damaged , you should put the flat washer , or replace the gaskets.

没有评论:

发表评论