Ultra low volume sprayer Terms

Ultra low volume sprayer is a high efficiency and prevention effects are new spray machinery. The aircraft used for both crops and fruit trees, forest pest control, but also for warehousing, greenhouse disinfection.

1. Before getting ① in the use of ultra low volume pressure sprayers, you should check the machine parts are complete, installed correctly, the connection part is solid and reliable, the cage rotation is flexible. ② adding gasoline to the engine and engine oil mixed oil dubbed, should first try to spray liquid tank and add water and watch the tank and the liquid flows through the pipe without leaking, tumble ejected droplet is normal. ③ Before use, but also according to control objects, under the guidance of professional and technical personnel selection type of chemicals and formulations to suit ultra-low volume spraying should prevail. ④ The drugs available spray throttle control.

2 Use the correct operation ① when spraying pesticides, machinery parts subject to normal operation, the operator first walking, then open the infusion switch, while walking to always keep the same speed, stop spraying, first turn off the infusion switch, then be shut down. ② spraying, pay attention to the prevailing wind direction downwind should begin to try the spray direction consistent with the natural wind direction, wind spraying is not allowed. ③ field spraying applications side spray technology, not facing the nozzle orifice crops, but crops have a certain angle, the angle depending on the size of the natural wind speed to be, the principle is the wind speed, the angle should be large, wind-hour angle to be small. ④ spraying time should not be selected in the hot noon, natural wind is greater than 3, should not be implemented ultra low volume spray. In warehouses, greenhouses, etc. When spraying spray time not too long, in order to prevent occurrence of poisoning people. ⑤ When the spraying liquid into the cage of the bearing part, should bearings removed, cleaned with kerosene or gasoline, according to the instructions in the bearing interior requirements add some molybdenum disulfide solid lubricant or calcium based grease lubrication, then then loaded on the cage. ⑥ In spraying, the nozzle atomizer tumble Do not touch crops, in order to prevent damage to the cage. ⑦ join the tank liquid not too full, to prevent overflow, and if there is an overflow, immediately cleaned.